.png){kind=logo}
Deal Of The Day
Top Sellers
Top Trending
New Arrivals
Shop By Brands717480-2 NSN 5990-00-775-1016 - 5c734130
: 1 U
NSN 5990-00-775-1016 - (5990007751016) Technical Details :
| MRC | Name | Details |
|---|---|---|
| AAFZ | BODY MATERIAL | "ALUMINUM,COMMERICAL STANDARD,ANODIZED PER MIL-A-8625 ORSTAINLESS STEEL PER AISI 303,QQ-S-763" |
| AAQL | BODY STYLE | "STANDARD ROUND, ROTATABLE HOUSING" |
| AAVH | SHOULDER DIAMETER | 1.9900 INCHES MINIMUM AND 1.9930 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 4.5320 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2495 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2470 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.9790 INCHES MINIMUM AND 1.9930 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2404 INCHES MINIMUM AND 0.2407 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3100 INCHES MINIMUM AND 0.4400 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 23 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 40.0 MAXIMUM |
| AJSP | STATOR INPUT CURRENT RATING | 25.0 MILLIAMPERES NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVF | PHASE SHIFT ANGLE IN DEG | 19.000 INPUT TO OUTPUT MINIMUM AND 25.000 INPUT TO OUTPUT MAXIMUM |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 2.00 INCH-OUNCES MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 1.00 INCH-OUNCES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| AJWH | SHAFT END PLAY | 0.0050 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.4100 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.3550 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0030 INCHES |
| CQRG | BODY MATERIAL | ALUMINUM OR STEEL COMP 303 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.965 ROTOR TO STATOR MINIMUM AND 0.985 ROTOR TO STATOR MAXIMUM |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 303 ASSN STD SINGLE MATERIAL RESPONSE OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| TEST | TEST DATA DOCUMENT | "05869-717480-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)" |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |