.png){kind=logo}
Deal Of The Day
Top Sellers
Top Trending
New Arrivals
Shop By Brands900141-69 NSN 5990-00-813-5085 - ba9fbc5d
: 1 U
NSN 5990-00-813-5085 - (5990008135085) Technical Details :
| MRC | Name | Details |
|---|---|---|
| AAFZ | BODY MATERIAL | "STEEL, STAINLESS" |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.2910 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0670 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4380 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 280.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 1.11 WATTS FINISHED-CHAMFERED |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 18.10 NOMINAL |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 79.50 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 107.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 81.70 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 9.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.000 INPUT TO OUTPUT MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 26.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0/+5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 16.0 CENTIMETER-GRAMS MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0030 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0570 NOMINAL MILS AND 0.0670 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7820 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES MINIMUM AND 0.0370 INCHES MAXIMUM SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES MINIMUM AND 0.0370 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | "ROUND, SLOTTED SINGLE SHAFT" |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1200 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TEST | TEST DATA DOCUMENT | "06481-900141-69 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)" |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |