.png){kind=logo}
Deal Of The Day
Top Sellers
Top Trending
New Arrivals
Shop By BrandsM20708/8-06C NSN 5990-01-189-3201 - 1f894fd6
: 1 U
NSN 5990-01-189-3201 - (5990011893201) Technical Details :
| MRC | Name | Details |
|---|---|---|
| AAFZ | BODY MATERIAL | "STEEL, CORROSION RESISTING" |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.0000 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.4180 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1200 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 20.0 CELSIUS |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 130.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 340.0 MILLIWATTS NOMINAL |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 200.00 MINIMUM AND 300.00 MAXIMUM |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | 80.50 MINIMUM AND 84.00 MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 6.00 MINIMUM AND 12.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 18.00 MINIMUM AND 30.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 12.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 19.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| AJWH | SHAFT END PLAY | 0.0100 INCHES NOMINAL |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7940 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2530 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 1.0 OUNCES |
| TEST | TEST DATA DOCUMENT | "81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS ""TYPICAL"", ""AVERAGE"", ""NOMINAL"", ETC.)." |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/8 GOVERNMENT SPECIFICATION |