.png){kind=logo}
Deal Of The Day
Top Sellers
Top Trending
New Arrivals
Shop By BrandsSAE-AS20708/500 NSN 5990-00-110-9441 - 7eb9b735
: 1 U
NSN 5990-00-110-9441 - (5990001109441) Technical Details :
| MRC | Name | Details |
|---|---|---|
| AAFZ | BODY MATERIAL | "STEEL, STAINLESS" |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.5460 INCHES MINIMUM AND 1.5760 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9380 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3060 INCHES MINIMUM AND 0.3360 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 20.0 CELSIUS |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 142.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 620.0 MILLIWATTS NOMINAL |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 11.00 NOMINAL |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 15.000 NOMINAL |
| AJTQ | ZSO-90 IMPEDANCE MAGNITUDE IN OHMS | 15.00 NOMINAL |
| AJTQ | III ZSO-90 IMPEDANCE MAGNITUDE IN OHMS | 15.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 7.500 INPUT TO OUTPUT MAXIMUM |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -60.0/+60.0 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -60.0/+60.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 2200.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| CRHN | SHAFT SLOT WIDTH | 0.0200 INCHES MINIMUM AND 0.0250 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | "ROUND, SLOTTED SINGLE SHAFT" |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0625 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6750 INCHES MINIMUM AND 0.6810 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | "81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS ""TYPICAL"", ""AVERAGE"", ""NOMINAL"", ETC.)." |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-S-20708/50 GOVERNMENT SPECIFICATION |